Toray Processor

Max Pretreatment -> if light is off fill more
To clean - drain 10 liters, wipe, and fill with 10 fresh liters -> NO WATER
- Should be containerized and disposed, not drained.

Sections:
1: Pretreatment solution -> PX = old, same as DP1

2: Water, 10 liters. Cools the brush. Brush should last ~100k plates
- Clean calcium buildup with vinegar, drain, then fill with water again.

3: Same as 2, but has a stiffer brush

4: After treatment - Blue Die
- 100% die, non diluted

5: Water rinse and dryer
- washes plates, then dries them.

Wipe down rollers with slightly damp lint free cloth daily.